Find a professional gate installation in Inner South Melbourne

Source a replacement security gate and install.

I have a garden bed that I’ve dug a trench out in and would like someone to install a 2 sleeper retaining wall (to hold back garden from sliding gate. And install the concrete footing for the sliding gate track. I have sleepers, sleeper stirrups and the sliding gate. I have dug out most of the garden trench due to installing sleepers inside fence posts and have left trench open. From memory there was some old footing from old brick fence when we installed picket fence If u can supply gate motor and set it up that would be a bonus too.

Please see photo of example and then photo of my area

Front gate isn’t closing and locking, needs to be fixed

One side of a duplex townhouse, would like to install a sliding automatic vehicle gate (marked blue), at maximum possible height 1.5 metres, and a pedestrian gate (red) and optional extension of the middle fence (green). Would like to get an estimate. Total length at the front is around 7.8 metres. Attached is the photo how I want the gate to be. Thanks.

I need a gate repaired by resetting the left post in concrete. At the moment the gate cannot close properly because the post is loose.

I moved over the weekend and my washing machine has had a slow leak ever since. I had a friend look at it and he thinks one of the pipes or outlets in the top left back corner of the machine might have a leak. It did stop for a day but it's leaked water again over night and I haven't used it since Tuesday. Looking for someone to check it out for me so I can determine whether its fixable or if I need to replace it. Dryer is directly on top of that washer at the moment and it's in a tight space. I cannot lift the dryer off by myself so that would need to be moved before the back of the machine can be accessed

We have a sliding front gate that is partially covered by a panel (see image) 110x75cm. We need someone to cut another identical/very similar panel, then weld it to the upper part of the gate above the latch.

Install 2 new washers in bathroom & 1 in kitchen and install a Bunnings gate at the top of the stairs.

Need to repair an door in the house which is getting jammed on the door frame. Also need adjustments to 3 pool gates which are too slow in closing.

Repair cable for electric gate. Preferably shorter cable as practical.

Need someone to install two baby gates for two entrances Please bring own tools and equipment to set up baby gates https://www.amazon.com.au/Super-Wide-Adjustable-Safety-Playpen/dp/B08T7SN99C https://www.amazon.com.au/Regalo-Extra-Stairway-Hallway-Through/dp/B07H8ZJSVM

Need to install baby gate into walls and stairs X2

I need someone who is good with electrical things - our front sliding gate is not rolling closed after we had to turn off the power one day. AND, one of our King cloud electrical arm chairs is stuck in the recline position. Help!

Outside metal gate alignment is too tight requiring a lot of force to close (see pictures). Not sure if it has expanded or footings have moved. Would like it adjusted so it opens and closes easily.

Remove 6 flat-head screws that retain 2 hinges on a wrought iron gate and replace with new screws.

Need to repair the remote control gate to close properly.

Need service for two gates for self-closing mechanism- see photos

Two gates need repairing, currently mot self closing and one gate not in alignment .dates flexible but need done by Wednesday next week. One gate will need to be fully installed , picking new panel up today . - Due date: Before Friday, 9 February 2024

I’ve just had a new front gates which include a new pedestrian gate installed at my house. Hoping a skilled sparky will be able to reconfigure the existing entry keypad and doorbell system (both worked fine on prior gate - they preceded this new gate) be reconfigured/reconnected to allow key pad gate entry and strike activation from doorbell system. - Due date: Flexible